If you have recently switched internet service providers and are having some issues connecting your NVR to your new network you may need to switch it from having a static IP to a DHCP IP. The static IP address assigned to your NVR may be preventing the device from changing IP addresses even after a reset or power cycle. For more information on how to resolve the issue, please refer to the information provided below.
Step 1: Connect a VGA or HDMI monitor to the back of your NVR and plug a USB mouse into the USB port on the front or back of the device.
Step 2: Log into the local interface of your device, click on System>>Network>>Basic. Make sure the mode is set to DHCP and click Apply.
Step 3: Once the NVR has been set to DHCP mode, unplug the device from power leaving the Ethernet cable plugged into your network. Wait for about 30 seconds and plug the power adapter back into the device.
Step 4: Log back into your device and go back to the Network menu. In the TCP/IP menu click on the DHCP toggle switch to set the device back to a static IP. You should be able to access the web user interface using the newly assigned IP address from the network.