After the camera has been successfully connected to your network, the camera can be physically installed. Please note, the camera has a weatherproof rating of IP65. An IP65 rating means that a device or enclosure is protected against dust and water jets from any direction but is not fully waterproof.
The installation surface should also support more than 3x the weight of the camera. If using a microSD card to store your recordings, please make sure it does not exceed 128GB and is inserted in the camera before installing it onto the mounting surface.
Step 1: Apply the installation template to the mounting surface and drill the holes.
Step 2:Insert the included wall anchors and align the holes of the camera base. Use a Phillips head screwdriver to hand tighten the camera base to the mounting surface to secure the camera.